The DSE703 is an Automatic Start Control Module that offers an excellent range of engine monitoring and protection features. The module has been designed to monitor over speed, under speed, high engine temperature, low oil pressure, battery charge fail and fail to start.

The module also has two configurable auxiliary inputs and a configurable engine pre-heat timer. When the module detects a fault condition it automatically shuts down the engine, indicating the exact fault via LED.

The Generator Controller has also been designed to automatically start the engine within three attempts and crank disconnect.

The DSE710 is an Automatic Start Control Module that offers an advanced range of engine monitoring and protection features. The module has been designed to monitor generator frequency, generator volts, generator current, engine oil pressure, engine coolant temperature, engine running hours and battery volts. The module also displays the engine speed. When the module detects a fault condition it automatically shuts down the engine and indicates the exact fault on the modules LCD display or relevant LED indicator.   The module can be configured using the front panel or via the DSE810 interface and a PC. The module can also be controlled from a PC that is located up to 100 metres away.

The DSE4110 is an Automatic Start Control Module that offers an excellent range of engine monitoring and protection features. The module has been designed to monitor over speed, under speed, high engine temperature, low oil pressure, battery charge fail and fail to start.   The module also has two configurable auxiliary inputs and a configurable engine pre-heat timer. When the module detects a fault condition it automatically shuts down the engine, indicating the exact fault via LED.      The DSE4110 module also includes a tamper proof engine hours counter, engine exercise mode function and the enclosure has a closed back.  The module has been designed to automatically start the engine within three attempts and crank disconnect.

The DSE4410 is an Auto Start Control Module with 3 phase sensing  for single gen-set applications. The module has been designed to work with electronic and non electronic engines providing advanced engine monitoring and protection features. 

The module is available in magnetic pick-up and Canbus versions.   It includes a back-lit LCD display which clearly shows the status of the generator at all times. It monitors frequency, voltage, oil pressure, coolant temperature and fuel level. It has also been designed to display the warning and shutdown status of the engine.  

The module includes seven inputs and six outputs. The module can either be programmed using the front panel or by using the DSE Configuration Suite PC software.

The DSE6110 is an Auto Start Control Module for single gen-set applications. The module has been designed to work with electronic and non electronic engines providing advanced engine monitoring and protection features.    The module includes a backlit LCD display which clearly shows the status of the engine at all times. It monitors, speed, frequency, voltage, current, oil pressure, coolant temperature and fuel level. The module has also been designed to display the warning and shutdown status of the engine.   The module includes six digital inputs, three analogue inputs and six outputs. Two of the outputs are configurable on the magnetic pick-up version and all six are configurable on the Canbus version. The module can either be programmed using the front panel or by using the DSE Configuration Suite PC software.

The DSE6010 is an Automatic Start control module for single gen-set appications and designed to work with electronic and non-electronic engines providing advanced engine monitoring and protection features.

 The module includes includes a backlit LCD display which clearly shows the status of the engine at all times.  It will monitor frequency, voltage, current, oil pressure, coolant temperature and fuel level.  The module has also been designed to display the warning and shutdown status of the engine.

The module includes seven inputs and six outputs.  Four outputs are configurable on the magnetic pick-up version and six are configurable on the CANbus version.  The module can be programmed using the front panel or by using the DSE Configuration Suite PC software.

The DSE4410 is an Auto Start Control module for single genset applicaiton.  The module has been disigned to work with electronic and non-electronic applications providing advanced monitoring and protection features.

The  module is available in CANbus and magnetic pick-up versions (to be specified on ordering)

The module includes a back-lit LCD display which clearly shows the status of the generator at all times.  It will monitor frequency, oil pressure, coolant temperature and fuel level.  The module has also been designed to display the warning a nd shutdown status of the engine.

The module includes six digital inputs and six outputs.  Four outputs are configurable on the magnetic pick-up version and six are configurable on the CANbus version.  The module can either be programmed using the front panel or by using the DSE PC Configuration Suite software.

The DSE3110 can be utilised as a Manual or Auto Start Module for single generating set applications and forms part of DSE's next generation of control modules.  The module has been designed to work with electronic and non-electronic engines providing advanced engine monitoring and protection features. 

The DSE3110 includes a back-lit LCD display  which clearly shows the status of the engine at all times.  The module monitors engine speed, frequency, voltage and run hours and also displays the warning and shutdown status of the engine.

The module includes six digital inputs and four outputs.  The module can either be programmed using the front panel or by using the DSE Configuration Suite PC software. 

The module is available in two variants: Magnetic Pick-up and Canbus.