GE
Administrator
The DSE6120 is an Auto Mains (Utility) Failure Control Module for single gen-set applications. The module has been designed to work with electronic and non electronic engines providing advanced engine monitoring and protection features. The module includes a backlit LCD display which clearly shows the status of the engine at all times. It monitors, speed, frequency, voltage, current, oil pressure, coolant temperature and fuel level. The module has also been designed to display the warning and shutdown status of the engine. The module includes six digial inputs, three analogue inputs and six outputs. Two of the outputs are configurable on the magnetic pick-up version and all six are configurable on the Canbus version. The module can either be programmed using the front panel or by using the DSE Configuration Suite PC software.
The DSE6020 is an Automatic Mains (utility) Failure control module for single gen-set appications and designed to work with electronic and non-electronic engines providing advanced engine monitoring and protection features.
The module includes includes a backlit LCD display which clearly shows the status of the engine at all times. It will monitor frequency, voltage, current, oil pressure, coolant temperature and fuel level. The module has also been designed to display the warning and shutdown status of the engine.
The module includes seven inputs and six outputs. Four outputs are configurable on the magnetic pick-up version and six are configurable on the CANbus version. The module can be programmed using the front panel or by using the DSE Configuration Suite PC software.
The DSE4420 is an Auto Mains (utility) Failure Control module for single genset applicaiton. The module has been disigned to work with electronic and non-electronic applications providing advanced monitoring and protection features.
The module is available in CANbus and magnetic pick-up versions (to be specified on ordering)
The module includes a back-lit LCD display which clearly shows the status of the generator at all times. It will monitor frequency, oil pressure, coolant temperature and fuel level. The module has also been designed to display the warning a nd shutdown status of the engine.
The module includes six digital inputs and six outputs. Four outputs are configurable on the magnetic pick-up version and six are configurable on the CANbus version. The module can either be programmed using the front panel or by using the DSE PC Configuration Suite software.
The DSE500 is an Automatic Transfer Switch Control Module. It is designed to monitor the incoming AC mains supply (3 phase) for under voltage. Should this fall out of limits the module will issue a start command to the generating set controller. Once the set is available the ATS module will control the transfer devices and switch the load from the mains to the generating set. Should the mains supply return to within limits the module will command a return to the mains supply and stop requesting the generator.
A clear mimic diagram with international symbols and LED indications provide at a glance information as to supply availability and load switching status.
The DSE333 is an Automatic Transfer Switch Controller for genset applications. The module will monitor the voltage and frequency of the incoming AC mains (utiltiy) supply (supports many topologies) and in the event of a failure will issue a start command to the generator control system.
The DSE5560 is an Automatic Transfer Switch and Mains Control Module, designed to automatically synchronise multiple DSE5510’s with single or multiple mains (utility) supplies. The module instructs the DSE5510’s to make precise changes to the generating set outputs. This makes the module suitable for many applications including peak lopping, peak shaving and no break return. The module has the ability to monitor the mains (utility) supply and start and stop the generating sets (being controlled by a DSE5510) upon removal or detection of the mains (utility) supply. The modules operational status is indicated on the LCD display and the front panel LED’s.
The DSE7560 is an Automatic Transfer Switch and Mains Control Module, designed to automatically synchronise multiple DSE7510s with single or multiple mains (utility) supplies. The module instructs the DSE7510s to make precise changes to the generating set outputs. This makes the module suitable for many applications including peak lopping, peak shaving and no break return.
The module has the ability to monitor the mains (utility) supply and start and stop the generating sets (being controlled by a DSE7510) upon removal or detection of the mains (utility) supply. The modules operational status is indicated on the LCD display and the front panel LEDs.
The DSE705 is an Auto Transfer Switch Control Module that has been designed to monitor the mains (utility) supply. When the mains (utility) power fails the module sends a start request to the generator control unit. When the generator is up and running the module transfers the load across. When the mains (utility) returns the module transfers the load back and removes the start command. The generator should then begin it’s shutdown procedure. The module can be configured so that they follow the users pre-set start and stop sequences
The DSE4130 is an Auto Transfer Switch Generator Controller that has been designed to monitor the mains (utility) supply. When the mains (utility) power fails the module sends a start request to the generator control unit. When the generator is up and running the module transfers the load across. When the mains (utility) returns the module transfers the load back and removes the start command. The generator should then begin its shutdown procedure. The Generator Control module can be configured so that it follows the users pre-set start and stop sequences. The DSE4130 enclosure has a closed back.
The DSE5110 is an Automatic Start Generator Controller designed to automatically start and stop diesel and gas generating sets that include non electronic engines. The Generator Control module also provides excellent engine monitoring and protection features. The module has the ability to monitor under speed, over speed, charge failure, emergency stop, low oil pressure, high engine temperature, fail to start, fail to stop and loss of the speed sensing signal. The Generator Controller displays fault conditions on the LCD display and via the LED indicators on the front.